Email cannot be empty
Password cannot be empty
Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
RS485 PDU Meter Support Hot Plug with RJ45 and Temperature &Humidity Ports
JSY-MK-1005 smart PDU meter has 1 RS485 communication port, 2 temperature &humidity ports, and 1 RJ45 port, with LCD displaying multiple electrical parameters to provide intelligent data center rooms dynamic environment monitoring and control. Please make correct wiring according to the product specification and model as shown above. Make sure to disconnect all signal sources before wiring to avoid danger and damage of equipment. Switch on the power for testing after confirm the wiring is correct.
Indicator Lights:
*Yellow Light: Communication Light, Flashes synchronously during communication data transmission.
*Green Light: Running Light, Flashes periodically with a period of 1S while the operating system are working.
*Red Light: Warning Light, Light up when there is alarm, turn off when there is no alarm or when there is no alarm.
After connect power supply, yellow light turn up 1S, then shift to yellow light, green light and red light all turn on for 2S , then switch to yellow light and red light go off, and green light flashes with 1S.
The product is set to the default configuration: Address Number 1、Baud Rte 9600bps、data format is "n, 8, 1", the data update rate is 1000ms, and the ratio is 1 Change the Settings of the product parameters and the general testing of the product by our JSY-MK-163 series product testing software.
Electric Energy Metering Function:
*Provide single phase voltage, current, power, power factor, frequency, active energy, carbon emissions etc. parameters.
*The data of the electric energy is an unsigned number of 4 bytes, and it will not overflow for 10 consecutive years, and the data is saved after outrage.
Main Technical Parameters:
- Working Power Supply：85V ~ 300VAC；
- Accuracy Level：1 Level；
- Measuring Range： 0.01A~63A, 85～300V AC；
- Current Resolution：0.01A
- Alarm Function：Current overcurrent alarm, over current alarm value can be set through menu or communication
- The voltage alarm are included overvoltage and undervoltage alarms. The overvoltage alarm value is 264V and the undervoltage alarm value is 176V.
Operating Instructions:
1、Screen Display：
|
Page |
Display Content |
Mark |
|
1 |
Voltage：220.00V Current：5.00A |
|
|
2 |
Power：1.100KW Frequency：50.00Hz |
|
|
3 |
Power Factor：1.000 Load Rate：31.25% |
|
|
4 |
Electric Energy： 10.530KWh |
|
|
5 |
Temperature1: 26.7℃ Humidity1： 60.5% |
|
|
6 |
Temperature2： 26.8℃ Humidity2： 60.5% |
|
|
7 |
Communication Address：1 baud rate：9600 |
|
|
8 |
Over voltage threshold：265V Under voltage threshold：175V |
|
|
9 |
Overcurrent threshold：16A Rated Current：16A |
|
|
10 |
Buzzer：On |
|
|
11 |
Hardware version：1.00 Software Version：1.05 |
|
Shenzhen JSY Technology Co., Ltd.
Power Metering and EV Charging Module &Solution OEM /ODM Expert