Email cannot be empty
Password cannot be empty
Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
10-Channel Ebike Charging Station Control Board
JSY-MK-1015 10-way electric bicycle charging control motherboard is an AC power supply device that integrates remote control of AC output power, charging safety control, energy metering and timely billing functions. It provides users with 10 charging ports, and users can charge through WeChat scanning or RRIF card swiping. The charging station can collect real-time charging information from users, including current, voltage, power, power factor and electricity. Users' charging data can be viewed in real-time through the operation platform, and users can pay charging bills in real time according to minutes and power.
Product Features:
1.Provide free operation platform
2.Payment as per charging time
3.10 AC output ports
4.4G communication, remote control
5.RFID &Scan charging
6.Timed charging
7.Voice broadcast
8.Support power rate recognition and power rate setting.
9.Full protection: zero-load power cut, over-load protection, full charge automatic stop, water-proof, lightning protection, anti-theft and anti-leakage of electricity.
Product Specifications:
1.Input type: single-phase AC 220V/50Hz
2.Charging ports: 10 ten outputs
3.Maximum total current: 40A
4.Single port maximum current: 4A
5.Relay specification 220V/10A, patented anti adhesion relay, more durable.
6.Adhesion detection: support relay anti adhesion patent holder
7.Max. power of single port: 900W, 900 by default and can be set to 200-1000.
8.Max. Power: 9000W, which is related to the set value.
9. Typical power consumption<5W
10.Input voltage: 220V ± 20%/50HZ &Output voltage: 220V.
11.Input/output terminal: input L/N, output L/N
12.Lower limit of the current: full charging automatic stop, the default value is 0.02A, which can be set to 0.02-1A.
13.Lower current limit delay: 90 seconds , the default value is 90s and can be set to 30-300s.
14.Overload protection: over power action, the default value is 5 seconds and can be set to 2 to 15s.
15.Under voltage and over-voltage protection: ≤ 176V AC, ≥ 264V AC
16.Over-current protection, no-load protection, over temperature protection, short circuit protection, leakage protection.
17.Power identification: to prevent unauthorized connection to high-power devices or overuse.
18.Voice broadcasting support is optional
19.The display screen: optional interface
20.Electrical isolation: 485/Mutual isolation of power/voltage/current inputs; Isolation and withstand voltage 2000V.
21.Communication method: 1 channel 485 interface, default baud rate 9600bps
22.Networking mode 4G full network connection platform with 4G antenna
23.Customizable charging platform support
24.Charging method with card swiping and WeChat QR code scanning optional.
25.The default charging time is 12H and can be set to 1-24H
26.Measurement parameters voltage/current/power energy/power factor/frequency, etc
27.Measurement accuracy ± 1% active electricity level 1
28.Measurement chip with built-in 24 bit dedicated measurement chip
29.Working temperature -20~+55 ℃
30.Storage temperature -40~+75 ℃
31.Relative humidity 5-95%, no condensation (at 40 ℃)
32.Altitude ≤ 3000 meters
33.Temperature drift ≤ 100ppm/℃
34.Places with no explosion, corrosive gases, conductive dust, significant shaking, vibration, or impact in the operating environment
Shenzhen JSY Technology Co., Ltd.
Power Metering and EV Charging Module &Solution OEM /ODM Expert