Email cannot be empty
Password cannot be empty
Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
JSY-MK-163 single phase mutual inductance electric energy metering module can measure, collect and transmit single-phase AC electrical parameters such as voltage, current, power, power factor, frequency, electricity quantity etc.. With 1 TTL level interface, completely isolated circuit, small size, simple interface, and easy to be embedded in various devices that need to measure electricity consumption, with excellent cost-effectiveness.
JSY-MK-163 can be widely used in energy-saving renovation, power, communication, railway, transportation, environmental protection, petrochemical, steel and other industries to monitor the current and power consumption of AC equipment.
Features:
1. Capture single-phase AC electrical parameters such as voltage, current, power, factor, frequency, and electric energy etc.
2. Adopting dedicated measurement chips and effective value measuring methods, with high measurement accuracy.
3. With 1 TTL communication interface, compatible with 5V/3.3V interface.
4. Standard Modbus-RTU communication protocol,which has good compatibility and is convenient for programming.
5. Low voltage DC5V power supply with anti reverse-wiring protection function, reversely wired power supply will not damage the module but cannot work.
6. High isolation voltage, withstand voltage up to DC3000V.
7. Through-core and split-core current transformer with different specifications optional, easy to use.
Specifications:
Product Model |
JSY-MK-163 |
|
Single-phase AC Input |
Voltage Measuring Range |
100V, 220V, 380V etc. optional. |
Current Measuring Range |
5A, 50A, 100A etc. and external split-core current transformer optional. |
|
Signal Processing |
Adopting dedicated measuring chip with 24 bit AD sampling. |
|
Overload Capacity |
Current 1.2 times measuring range is sustainable. Instantaneous(<20mS) current 5 times, voltage 1.5 times, measuring range will not be damaged. |
|
Input Impedance |
Voltage channel>1KΩ/V |
|
Communication Interface |
Interface Type |
1 TTL interface (compatible with 5V/3.3V) |
Communication Protocol |
MODBUS-RTU protocol |
|
Data Format |
Can be set by software, "n, 8,1", "e, 8,1", "o, 8,1", "n, 8,2" |
|
Communication Rate |
The Baud can be set to 1200, 2400, 4800, 9600Bps, default Baud is 4800bps. |
|
Communication Data |
Electrical parameters such as voltage, current, power, energy, power factor and frequency etc., refer to the Mdobus data log list. |
|
Measurement Accuracy |
Voltage, current, electricity quantity: less than ± 1.0%; Active power level 1 |
|
Power Supply |
DC single power supply 5V, power consumption 8-10mA. |
|
Isolation |
Isolation between the tested power supply and power supply. Isolation withstand voltage 3000VDC. |
|
Working Environment |
Working Temperature |
-20~70 ℃ |
Storage Temperature |
-40~85 ℃ |
|
Relative Humidity |
5-95%, no condensation (at 40 ℃) |
|
Altitude |
0-3000 meters |
|
Environment |
No explosions, corrosive gases or conductive dust, no significant shaking, vibration or impact. |
|
Temperature Drift |
≤ 100ppm/℃ |
|
Installation Method |
PCB welding |
|
Module Size |
25.6x43.3x29mm |
Power Metering and EV Charging Module &Solution OEM /ODM Expert